27dp series are connectors produced based on smb type (sub miniature type b) specifed in mil-prf-39012. 27dp is super small size coaxial cable connectors for 50 group corresponding to minimization of communication equipment. connection method is push on type, and fxing method cable is by crimping or soldering. 27dp series smb type coaxial connector 3 p ) 4 $ p n q m j b o u 3 p ) 4 $ p n q m j b o u item material / finish shell (body) copper alloy / au or ni plating contact (male) copper alloy / au plating contact (female) copper alloy / au plating insulator ptfe 141125 frequency range characteristic impedance 50 feature specifications material/finish the specifcations are typical but may not apply to all connectors. please check the specifcations on each item with its drawing from us when you use. characteristic impedance 50 rated volatge 335vac(r.m.s.) dielectric withstanding voltage 1,000v ac(r.m.s.) for 1minute insulation resistance 1,000m min. at 500v dc contact resistance 6m max. v.s.w.r. 1.2 max.dc to 2ghz 1.3max. ( 2 to 3ghz) operating temperature -40 ? +85 conforming standard jis-c-5415mil-prf-39012 dc to 3ghz please ask us for the cable assemblies to assure its performanc e. http://www.ddknet.co.jp specifcations and/or dimensions in this catalog are subject to change without notice. please varify the latest specifcations with our drawings.
2 plug right angle plug crimp type semi-flexible cable type crimp type part number applicable cable a l finish assembly instruction crimp tool outer conductor center conductor 27dp-p-1.5qev-aa-cf 1.5ds-qehv 4.8 17.5 ni au 1 cr-h-1160 1.5d-qev 27dp-p-1.5qew-aa-cf 1.5d-2w 4.8 17.5 ni au cr-h-1160 1.5d-qew 27dp-sp-1.5dhqs-cr1-cf 1.5d-hq?super 4.8 18.1 ni au cr-h-1156 27dp-sp-2.5dhqs-cr1-cf 2.5d-hq?super 5.9 18.2 ni au cr-h-1163 part number applicable cable finish assembly instruction outer conductor center conductor 27dp-sp-fccav1-so-cf fccavg1 ni au part number applicable cable a finish assembly instruction crimp tool outer conductor center conductor 27dp-lp-0.8dw-cr1-cf 0.8d-qew 3.4 ni au cr-h-k0012-04 27dp-lp-1.5qev-aa-cf 1.5ds-qehv 4.8 ni au cr-h-1160 1.5d-qev 27dp-lp-1.5qew-aa-cf 1.5d-qew 4.8 ni au cr-h-1160 part number applicable cable a l1 finish assembly instruction crimp tool outer conductor center conductor 27dp-lp-1.5dw-cr1-cf 1.5d-qew 4.8 10.0 ni au 2 cr-h-1156 27dp-lp-1.5dhqs-cr1-cf 1.5d-hq?super 4.8 10.0 ni au cr-h-1156 1.5d-qev 27dp-lp-2.5dhqs-cr1-cf 2.5d-hq?super 5.9 11.0 ni au cr-h-1163 2.6d-xfv-a l 6 a 6 4 12.1 14 a 13.2 14 a l1 6 9.3 9.7 unitmm http://www.ddknet.co.jp 27dp series specifcations and/or dimensions in this catalog are subject to change without notice. please varify the latest specifcations with our drawings.
3 right angle plug bulkhead jack semi-flexible cable type part number applicable cable finish assembly instruction outer conductor center conductor 27dp-lp-fccav1-so-1-cf fccavg1 ni au crimp type semi-flexible cable type part number applicable cable finish assembly instruction crimp tool outer conductor center conductor 27dp-bj-1.5dw-cr1-cf 1.5d-qew ni au cr-h-1156 part number applicable cable finish assembly instruction outer conductor center conductor 27dp-bj-fccav1-so-cf fccavg1 ni au 14 a l1 6 9.3 9.7 6 19.4 7.9 8 2.5 3.2 +0.1 0 1.2 +0.1 0 5.2 +0.1 0 3.2 +0.1 0 14.3 3.43 2.5 6 7.9 5.2 +0.1 0 1.2 +0.1 0 6 19.4 7.9 8 2.5 3.2 +0.1 0 1.2 +0.1 0 5.2 +0.1 0 3.2 +0.1 0 14.3 3.43 2.5 6 7.9 5.2 +0.1 0 1.2 +0.1 0 panel mounting dimensions 6 19.4 7.9 8 2.5 3.2 +0.1 0 1.2 +0.1 0 5.2 +0.1 0 3.2 +0.1 0 14.3 3.43 2.5 6 7.9 5.2 +0.1 0 1.2 +0.1 0 6 19.4 7.9 8 2.5 3.2 +0.1 0 1.2 +0.1 0 5.2 +0.1 0 3.2 +0.1 0 14.3 3.43 2.5 6 7.9 5.2 +0.1 0 1.2 +0.1 0 panel mounting dimensions unitmm http://www.ddknet.co.jp 27dp series specifcations and/or dimensions in this catalog are subject to change without notice. please varify the latest specifcations with our drawings.
4 receptacle part number finish outer conductor center conductor 27dp-sr-pc-1-cf ni au part number finish outer conductor center conductor 27DP-SR-1-CF ni au part number finish outer conductor center conductor 27dp-sr-2-cf ni au part number finish outer conductor center conductor 27dp-sr2-3-cf ni au 9.8 7.3 5.7 4-0.7 5.08 0.1 2.54 0.05 5.08 0.1 pcb mounting dimensions 1.2 0.1 0 2.54 0.05 27dp-sr-pc-1 9.8 7.3 5.7 4-0.7 5.08 0.1 2.54 0.05 5.08 0.1 pcb mounting dimensions 1.2 0.1 0 2.54 0.05 27dp-sr-pc-1 1.7 9.5 4 3 16.5 3.08 9.5 5.9 5.9 1 2.4 5.9 9.5 5.9 1.7 1.5 1.7 9.5 12.7 1 3.08 4 2.4 5.9 0.05 panel mounting dimensions 4- 2.4 +0.1 0 . 0.0 +0.1 0 . +0.1 0 . . . 1. 1. 1. . 1. 1 .0 . . 0.0 . +0.1 0 . 0.0 +0.1 0 . +0.1 0 5.8 12.2 16.8 2 4 1 3.08 1.65 9.5 15.5 panel mounting dimensions 6.1 0.05 12.2 0.1 2- 2.75 0.05 3.4 +0.1 0 5.8 12.2 16.8 2 4 1 3.08 1.65 9.5 15.5 panel mounting dimensions 6.1 0.05 12.2 0.1 2- 2.75 0.05 3.4 +0.1 0 unitmm http://www.ddknet.co.jp 27dp series specifcations and/or dimensions in this catalog are subject to change without notice. please varify the latest specifcations with our drawings.
5 right angle receptacle part number finish outer conductor center conductor 27dp-lr-pc-1-cf ni au cheap version includes die-casting 27dp-lr-pc-14, part number finish outer conductor center conductor 27dp-lr-pc-14 ni au accomplished low cost by using press and molding method. (11.1) (9.9) 7.4 4.55 2.5 ( 1) 9.9 (12) 5.08 0.1 2.54 0.05 5.08 0.1 2.54 0.05 2.5 4.55 pcb mounting dimensions 5- 1.2 0.1 0 9.9 (12) 5.08 0.1 2.54 0.05 5.08 0.1 2.54 0.05 2.5 4.55 pcb mounting dimensions 5- 1.2 0.1 0 unitmm http://www.ddknet.co.jp 27dp series specifcations and/or dimensions in this catalog are subject to change without notice. please varify the latest specifcations with our drawings.
6 h 27dp-lr-ps-1 28290 5.92 0.3 (7.1) 3.75 6.6 (9.9) 1 1 pcb mounting dimensions ( 1) (?1) 1.55 0.05 1.55 0.05 1.8 0.05 6.52 0.05 2.1 0.05 1.8 0.05 3.42 0.05 1.2 0.05 (1.76) (12.9) 0.5 4.92 0.05 3.26 0.05 4.92 2- ? 0.05 ( 1) smt mounting style tape and reel package is available. the exposing contact tail enables you to be visible the solderi ng condition after refow process. accomplished low cost by using press and molding method. with regard to orders less than 500, please contact us. 27dp-lr-ps-1 part number finish package style minimum ordering quantity note outer conductor center conductor 27dp-lr-ps-1-500 au au tape and reel 500 pcs./ reel 1 reel 27dp-lr-sp-1 500pcs. package ?80 ?330 user direction of feed 25.5 29.5 2 4 12 1.75 11.5 24 8.2 ?1.5 tape and reel dimensions right angle receptacle connector dimensions unitmm http://www.ddknet.co.jp 27dp series specifcations and/or dimensions in this catalog are subject to change without notice. please varify the latest specifcations with our drawings.
7 part number a b c d l finish outer conductor center conductor 27dp-br-9-cf 7.0 0.5 2.2 6.0 12.9 ni au 27dp-br-11-cf 6.2 0.8 3.0 5.4 13.7 ni au a b d c 2.3 1 l ? bulkhead receptacle unitmm http://www.ddknet.co.jp 27dp series specifcations and/or dimensions in this catalog are subject to change without notice. please varify the latest specifcations with our drawings.
8 2 1.5 4 ?? ?? ?? ?? ferrule contact body cable boot spread the tip ferrule boot outer conductor insulator crimping dies boot cx12-b14-0018 27dp-p-1.5qev-aa reqd item drawing no. part name material finish rev. title drawing no. approved designed checked drawn by scale unit 5 rance tole dimension angle mm nov.30.98 h.aoki nov.30.98 h.aoki 1.722.14 c coo p-oi co soi no a-r o mi - o iv show it to illustration dimensions through a boot to a cable. (note) be careful about the directionality of the ferrule. (note) please be careful to not damage the outer conductor, insulator and center conductor. pre-soldering the center conductor. soldering cable inside conductor and a contact. (note) please be careful to not deform the insulator by heat. (note) when the solder is stick out, please shave the extra solder. spread the tip of the outside conductor. insert a cable in body assembling and cover with the ferrule which let go through beforehand on an outside conductor, crimp. (notethe thing by which a gap between the body assembly ferrule is less than 0.5. assembly instruction (1) 2 1.5 4 ?? ?? ?? ?? ferrule contact body cable boot spread the tip ferrule boot outer conductor insulator crimping dies boot cx12-b14-0018 27dp-p-1.5qev-aa reqd item drawing no. part name material finish rev. title drawing no. approved designed checked drawn by scale unit 5 rance tole dimension angle mm nov.30.98 h.aoki nov.30.98 h.aoki 1.722.14 center conductor pre-soldering contact soldering no gap a-r (body assembling - contact interval) cover the boot on the ferule. parts confguration unitmm http://www.ddknet.co.jp 27dp series specifcations and/or dimensions in this catalog are subject to change without notice. please varify the latest specifcations with our drawings.
9 the cable length required for the cable assembly. l l=l 1 +0.6 l=l 2 -2.5 handle a cable end face to illustration dimensions. (noteplease be careful to not damage the outer conductor and center conductor. pre-solder the center conductor. disentangle an outside conductor uniformly and spread the tip. assembly instruction (2) ? body plate ferrule ? ??Y??`??L YI `???I?? ?`???? ?? `???? `??????? ? ?`???Rs? ? ? ???`??? ??M??? ???????? ????? `???`?? ??????? ? ???M?`g?g? Q? ?x ? a,b,c= ? ???????? ????? ?~Fg???M ?? ?????`?????? ?????? contact slit part 0.150.3 0.5 max. l 1 cable outside conductor stab expectation ? ? height after press-in ? with a thing of cable outside conductor ga beteen ferrule and bod ? ? ???~F??? ? able errule od assebl ontact uter onductor nsulator enter onductor read the ti oldering riing ies b a (3) 56 c ? ?x 6 5 resoldering ? od late errule ? ??Y??`??L YI `???I?? ?`???? ?? `???? `??????? ? ?`???Rs? ? ? ???`??? ??M??? ???????? ????? `???`?? ??????? ? ???M?`g?g? Q? ?x ? a,b,c= ? ???????? ????? ?~Fg???M ?? ?????`?????? ?????? contact slit part 0.150.3 0.5 max. l 1 cable outside conductor stab expectation ? ? height after press-in ? with a thing of cable outside conductor a-r1 gap between ferrule and body ? ? ???~F??? ? cable ferrule body assembly contact outer conductor insulator center conductor spread the tip soldering crimping dies b a (3) 56 c ? ?x l 2 8.6 0.2 2 0.2 5 0.2 pre-soldering insert the ferrule into the cable. insert body assembling between an outside conductor, insulators. (noteinternal conductor in a contact slit more than half being satisfed. (noteaya cover evenly over the frst knurling the outer conductor. cover with the ferrule which let go through beforehand on an outside conductor and knock it against body system and crimp it. (note) the gap between body and ferrule is within 0.5. solder cable inside conductor and a contact. (note) please be careful to not deform the insulator by heat. compress the plate into the body. parts confguration unitmm http://www.ddknet.co.jp 27dp series specifcations and/or dimensions in this catalog are subject to change without notice. please varify the latest specifcations with our drawings.
|
